Truma Combi D 4 heating system (Next Generation) with iNet X Panel. Heating and hot water for small and medium-sized vehicles
The Combi D 4 heats and warms water in just one appliance. A ten-litre water tank is integrated into the heater: In winter, the water is simply heated as well; in summer, you heat the water independently of the heating.
- Economical battery power and diesel consumption due to more efficient combustion
- 2 in 1: Heat room and water
- More independent - heat at any altitude due to integrated pressure sensor
- Simple control with the digital control panel CP plus (iNet ready) or via iNet X system
- Optimum warm air distribution due to four air outlets
- 10 l stainless steel water tank
- Automatic air conditioning possible when using a Truma air conditioning system
Technical Details:
Energy sources Diesel nach EN 590, HVO (DIN EN 15940)
Rated heat output in diesel mode 1000 W/2000 W/3000 W/4000 W
Fuel consumption 0,1 – 0,4 l/h
Power consumption (at 12 V): operation of heater and water container 0,4 – 8,1 A
Water capacity 10 Liter
Heating time (from approx. 15 °C to approx. 60 °C): Water container approx. 24 min
Heating time (from approx. 15 °C to approx. 60 °C): Heater and water container acc. to EN 15033 approx. 80 min
Power consumption (at 12 V): heating water container 0,5 A
Air flow rate (free-blowing) max. 287 m³/h
Quiescent current approx. 1 mA
Quiescent current consumption CP plus (optional) 3 mA
FrostControl heating element (optional) max. 0,4 A
Pump pressure max. 2,8 bar
System pressure max. 4,5 bar
Dimensions (L x W x H) 510 x 450 x 300 mm
Installation dimensions (min.imum dimensions–additional space must be provided for the gas connection. water connections and drain valve (L x W x H) depending on the installation situation) 540 x 500 x 350 mm
Weight (without peripherals) 14,8 kg
Included in the kit
- Combi D 4
- INet X Panel control panel
